DELPHI FITTINGS
Part #: 62SF-KIT
Code 62 Split Flange Kit
Product Overview
The Delphi Fittings Part 62SF-KIT is a complete assembly solution for making one SAE Code 62 (heavy-duty, high-pressure series) hydraulic flange connection. These kits simplify procurement and ensure all necessary, correctly matched components are on hand for a secure and reliable installation in the most demanding hydraulic systems. The kit typically includes two robust Code 62 split flange halves, four high-strength mounting bolts with lock washers, and one O-ring sized for the corresponding flange. These components are used to securely clamp a Code 62 flanged head fitting or tube end against a flat port face, creating a superior, high-integrity seal. Manufactured from high-quality carbon steel and zinc-plated for corrosion resistance, all components in the 62SF-KIT conform to SAE J518 / ISO 6162-2 standards.
Key Features & Specifications
| Material | High-Grade Carbon Steel (Flange Halves and Hardware) |
|---|---|
| Standard | Conforms to dimensional specifications of SAE J518 / ISO 6162-2 for Code 62 (Heavy Duty). |
| Kit Components | Typically includes: - Two (2) Code 62 Split Flange Halves (e.g., Part 62SF) - Four (4) High-Strength Hex Head Bolts (Grade 8 or metric Class 10.9) - Four (4) Lock Washers - One (1) O-Ring (Buna-N or Viton®) |
| Corrosion Protection | Standard Zinc Plating on steel components for enhanced durability. |
| Primary Function | To provide all the necessary components to securely clamp one Code 62 flange head (found on adapters, elbows, or hose ends) to a mating port surface in a high-pressure system. |
| Working Pressure | Designed for use in SAE Code 62 systems, which are typically rated for pressures up to 6000 PSI (420 bar), regardless of size. |
Commonly Available Sizes (Part #62SF-KIT Series)
Delphi Fittings offers the 62SF-KIT Code 62 Split Flange Kit in a full range of standard sizes for high-pressure systems. The size is designated by the flange dash size, which corresponds to the Code 62 connection it is intended to assemble.
Examples include (Kit Size for corresponding Code 62 Flange):
- 62SF-KIT-08: For 1/2" (-08) Code 62 Flange
- 62SF-KIT-10: For 5/8" (-10) Code 62 Flange
- 62SF-KIT-12: For 3/4" (-12) Code 62 Flange
- 62SF-KIT-16: For 1" (-16) Code 62 Flange
- 62SF-KIT-20: For 1-1/4" (-20) Code 62 Flange
- 62SF-KIT-24: For 1-1/2" (-24) Code 62 Flange
- 62SF-KIT-32: For 2" (-32) Code 62 Flange
Note: Kits are available with inch or metric high-strength bolts, please specify when ordering. For unlisted sizes, specific bolt or O-ring material requirements, or other custom needs, please contact our sales team.
Applications
The Part 62SF-KIT Code 62 Split Flange Kit is essential for:
- Assembling high-pressure SAE Code 62 flange connections on hydraulic pumps, motors, valves, cylinders, and heavy-duty manifolds.
- Used in conjunction with Code 62 flange head fittings to connect hydraulic hoses or tubes to equipment ports in severe-duty applications.
- Critical industries such as mining, heavy construction, forestry, oil and gas, and industrial machinery where pressures regularly reach up to 6000 PSI.
- Field service and maintenance operations where having all necessary, correctly matched high-strength components in a single kit simplifies repairs and ensures safety.
Installation & Usage Guidelines
- Ensure the Code 62 flange head of the adapter or hose fitting and the mating port surface are all perfectly clean, undamaged, and free from any contaminants.
- Verify that the O-ring from the kit is the correct size and material for the application and is properly lubricated with system-compatible fluid.
- Carefully install the lubricated O-ring into the groove on the flange head.
- Position the flange head squarely against the port face.
- Place the two 62SF split flange halves from the kit around the neck of the flange head, ensuring they are correctly seated.
- Insert the four high-strength mounting bolts with lock washers from the kit through the flange halves and into the tapped holes in the port.
- Lightly snug all four bolts by hand. Then, tighten them progressively and evenly in a diagonal or cross-pattern sequence to the manufacturer's recommended torque specification for the Code 62 flange size and high-strength bolt grade. This is critical to ensure even clamping force and uniform O-ring compression.
Why Choose Delphi Fittings Part 62SF-KIT?
- Designed for High Pressure: All components, including flange halves and bolts, are engineered to meet the demanding requirements of SAE J518 Code 62 for systems operating up to 6000 PSI.
- Convenience and Reliability: Provides all the correctly matched, high-strength components for one complete Code 62 flange connection in a single package.
- Standard Compliance: All components are manufactured to meet SAE J518 / ISO 6162-2 specifications for Code 62, ensuring correct fit, function, and interchangeability.
- Durable Construction: All steel components are made from high-grade carbon steel for maximum strength and reliability in severe-duty applications.
- Enhanced Corrosion Resistance: Standard zinc plating on steel components provides robust protection against rust and environmental factors.
- Quality-Assured Manufacturing: Produced under Delphi Fittings' rigorous ISO 9001:2015 certified quality management system.
Get a Quote for Part 62SF-KIT - Code 62 Split Flange Kit
For a convenient, reliable, and complete solution for your high-pressure SAE Code 62 flange connections, the Part 62SF-KIT is the ideal choice. Contact Delphi Fittings today for wholesale pricing, bulk order information, and expert technical support for all your hydraulic component needs.
Request a Quote Back to Flange Components