DELPHI FITTINGS
Part #: 61SF-KIT
Code 61 Split Flange Kit
Product Overview
The Delphi Fittings Part 61SF-KIT is a complete assembly solution for making one SAE Code 61 (standard pressure series) hydraulic flange connection. These kits simplify procurement and ensure all necessary components are on hand for a secure and reliable installation. The kit typically includes two Code 61 split flange halves, four appropriate grade mounting bolts with lock washers, and one O-ring sized for the corresponding flange. These components are used to securely clamp a flanged head fitting or tube end against a flat port face, creating a robust, high-integrity seal. Manufactured from high-quality carbon steel and zinc-plated for corrosion resistance, all components in the 61SF-KIT conform to SAE J518 / ISO 6162-1 standards, making them ideal for a wide range of medium to high-pressure hydraulic applications.
Key Features & Specifications
| Material | High-Grade Carbon Steel (Flange Halves and Hardware) |
|---|---|
| Standard | Conforms to dimensional specifications of SAE J518 / ISO 6162-1 for Code 61 (Standard Duty). |
| Kit Components | Typically includes: - Two (2) Code 61 Split Flange Halves (e.g., Part 61SF) - Four (4) Hex Head Bolts (Grade appropriate for Code 61) - Four (4) Lock Washers - One (1) O-Ring (Buna-N or Viton®) |
| Corrosion Protection | Standard Zinc Plating on steel components for enhanced durability. |
| Primary Function | To provide all the necessary components to securely clamp one Code 61 flange head (found on adapters, elbows, or hose ends) to a mating port surface. |
| Working Pressure | Designed for use in SAE Code 61 systems, which are typically rated for pressures from 3000 to 5000 PSI (210 to 350 bar), depending on the size. |
Commonly Available Sizes (Part #61SF-KIT Series)
Delphi Fittings offers the 61SF-KIT Code 61 Split Flange Kit in a full range of standard sizes. The size is designated by the flange dash size, which corresponds to the Code 61 connection it is intended to assemble.
Examples include (Kit Size for corresponding Code 61 Flange):
- 61SF-KIT-08: For 1/2" (-08) Code 61 Flange
- 61SF-KIT-10: For 5/8" (-10) Code 61 Flange
- 61SF-KIT-12: For 3/4" (-12) Code 61 Flange
- 61SF-KIT-16: For 1" (-16) Code 61 Flange
- 61SF-KIT-20: For 1-1/4" (-20) Code 61 Flange
- 61SF-KIT-24: For 1-1/2" (-24) Code 61 Flange
- 61SF-KIT-32: For 2" (-32) Code 61 Flange
Note: Kits are available with inch or metric bolts, please specify when ordering. For unlisted sizes, specific bolt or O-ring material requirements, or other custom needs, please contact our sales team.
Applications
The Part 61SF-KIT Code 61 Split Flange Kit is essential for:
- Assembling SAE Code 61 flange connections on hydraulic pumps, motors, valves, cylinders, and manifolds in a convenient, all-in-one package.
- Used with flange head fittings (straight adapters, elbows, tees) to connect hydraulic hoses or tubes to equipment ports.
- A wide range of industries including mobile equipment (construction, agriculture, forestry), industrial machinery, material handling, and marine applications.
- Field service and maintenance operations where having all necessary components in a single kit simplifies repairs and reduces downtime.
Installation & Usage Guidelines
- Ensure the flange head of the adapter or hose fitting and the mating port surface are clean, undamaged, and free from any contaminants.
- Verify that the O-ring from the kit is the correct size and material for the application and is properly lubricated with system-compatible fluid.
- Carefully install the lubricated O-ring into the groove on the flange head.
- Position the flange head squarely against the port face.
- Place the two split flange halves from the kit around the neck of the flange head, ensuring they are correctly seated.
- Insert the four mounting bolts with lock washers from the kit through the flange halves and into the tapped holes in the port.
- Lightly snug all four bolts by hand. Then, tighten them progressively and evenly in a diagonal or cross-pattern sequence to the manufacturer's recommended torque specification for the flange size and bolt grade. This is critical to ensure even clamping force and uniform O-ring compression.
Why Choose Delphi Fittings Part 61SF-KIT?
- Convenience and Efficiency: Provides all the necessary components for one complete Code 61 flange connection in a single package, simplifying inventory and assembly.
- Standard Compliance: All components are manufactured to meet SAE J518 / ISO 6162-1 specifications for Code 61, ensuring correct fit, function, and interchangeability.
- Durable Construction: All steel components are made from high-grade carbon steel for excellent strength and reliability in high-pressure hydraulic applications.
- Enhanced Corrosion Resistance: Standard zinc plating on steel components provides robust protection against rust and environmental factors.
- Guaranteed Compatibility: Ensures all parts of the clamp system (halves, bolts, washers, O-ring) are correctly matched for the specified flange size.
- Quality-Assured Manufacturing: Produced under Delphi Fittings' rigorous ISO 9001:2015 certified quality management system.
Get a Quote for Part 61SF-KIT - Code 61 Split Flange Kit
For a convenient, reliable, and complete solution for your SAE Code 61 flange connections, the Part 61SF-KIT is the ideal choice. Contact Delphi Fittings today for wholesale pricing, bulk order information, and expert technical support for all your hydraulic component needs.
Request a Quote Back to Flange Components