
Metric Hydraulic Fittings Manufacturer & DIN Adapter Supplier
Steel metric conversion adapters for OEM, distributor and private-label supply programs.
Metric-to-Inch Adapters for Imported and Mixed-Standard Equipment
Delphi Fittings manufactures steel metric hydraulic adapters in Zhejiang, China for OEMs and fitting distributors. This catalog includes connections between metric ports or 24° cone systems and JIC, ORFS, BSPP, BSPT and NPT/NPTF components.
“Metric” identifies the thread dimensions, not the sealing interface. A buyer must also specify whether the connection is an ISO 8434-1 24° cone, an ISO 6149 O-ring port, an ISO 9974 metric port/line connection, a bonded-seal interface or another approved design. Delphi reviews the complete end descriptions and drawing before quoting a production equivalent.
Metric Fitting & Adapter Catalog (Steel)
ORFS Male x Metric Male Adapter
Part #: 6068 / 6605Straight ORFS-to-metric adapter. Confirm the metric thread, seat or port-seal form and approved drawing for the required size.
ORFS Male x Metric Male 90° Elbow
Part #: 606990° ORFS-to-metric adapter elbow. Confirm the metric connection type, orientation and approved drawing before ordering.
ORFS Male x ORFS Male x Metric Male Run Tee
Part #: 6168Tee adapter connecting two female ORFS swivels on the run and one female Metric port on the branch.
ORFS Male x ORFS Male x Metric Male Branch Tee
Part #: 6169Tee adapter connecting one female ORFS swivel on the run and one female Metric port on the run, with one female ORFS swivel on the branch.
Metric Male x Metric Male Union
Part #: 9001Straight union connecting two female Metric ports of the same size and standard (e.g., DIN Light to DIN Light).
BSPP Male x Metric Male Adapter
Part #: 9004Straight BSPP-to-metric adapter. Confirm the BSPP sealing face and the metric port, seat or stud-end form on the approved drawing.
Metric Male x Female BSPP Adapter
Part #: 9018Straight metric-to-female-BSPP adapter. Confirm the BSPP seat and metric connection definition on the approved drawing.
BSPP Male x Female Metric Swivel Adapter
Part #: 9019Straight adapter connecting a male Metric fitting to a female BSPP port (using bonded seal), featuring a metric swivel nut.
JIC Male x Female Metric Swivel Adapter
Part #: 9022Straight adapter connecting a male Metric fitting to a female JIC swivel fitting/tube.
JIC Male x Female Metric Adapter
Part #: 9022FStraight adapter connecting a male Metric fitting into a female JIC swivel fitting/tube (non-swivel metric end).
Metric Male x Female JIC Swivel Adapter
Part #: 9024Straight metric-to-female-JIC-swivel adapter. Confirm the JIC size and the metric port, seat or stud-end form.
Metric Hollow Hex Socket Plug
Part #: 9029 / 9029AInternal-hex metric port plug. Confirm the port standard, thread pitch, sealing element and drawing dimensions.
Metric Hex Head Plug
Part #: 9030MExternal-hex metric port plug. Confirm the port standard, thread pitch, sealing element and drawing dimensions.
Female Metric x Female Metric Union
Part #: 9043MStraight union connecting two male Metric fittings of the same standard.
JIC Male x Metric Male 45° Elbow
Part #: 906645° adapter elbow connecting a female JIC swivel/tube to a female Metric port.
JIC Male x Metric Male Adapter
Part #: 9067 / 9068 / 9605 / 9606Straight adapter connecting a female JIC swivel/tube to a female Metric port.
JIC Male x Metric Male Adjustable Elbow/Fitting
Part #: 9069 / 9069LAdjustable JIC-to-metric elbow. Confirm the metric stud-end design, sealing method, orientation and approved drawing.
JIC Male x JIC Male x Metric Male Adjustable Run Tee
Part #: 9168Tee adapter connecting two female JIC swivels/tubes on the run and one female Metric port on the adjustable branch.
JIC Male x JIC Male x Metric Male Adjustable Branch Tee
Part #: 9169Tee adapter connecting one female JIC swivel/tube and one female Metric port on the run, with one female JIC swivel on the adjustable branch.
Metric Male x Female NPTF Adapter
Part #: 9235Straight adapter connecting a male NPTF pipe/fitting into a female Metric port.
NPTF Male Pipe x Female Metric Adapter
Part #: 9325Straight adapter connecting a male Metric fitting into a female NPTF port.
JIC Male x Metric Compression/Port Adapter
Part #: 9605S / 9606SDual purpose adapter connecting female JIC swivel/tube to either a metric compression fitting port or a standard metric parallel port.
NPTF Male Pipe x Metric Compression/Port Adapter
Part #: 9607Dual purpose adapter connecting female NPTF port to either a metric compression fitting port or a standard metric parallel port.
Metric Compression/Port Male x Female NPTF Adapter
Part #: 9635S / 9636SDual purpose adapter connecting male NPTF pipe/fitting to either a metric compression fitting port or a standard metric parallel port.
Related Metric Accessories
Metric Bonded O-Ring Seal
Part #: 9500MM SeriesBonded seal (Dowty washer) specifically sized for sealing male metric parallel thread fittings against flat surfaces. Usually Buna-N.
PART-SERIES CROSS REFERENCE
Metric Conversion Adapters: Parker, Brennan & Eaton References
Parker F8OMX, F82EDMX and F87OMX searches involve different metric sealing systems. Brennan 7001 and Eaton Aeroquip GG108-NP are additional catalog references for JIC-to-metric O-ring connections. Send the full thread and seal description with your part list.
| Reference brand | Catalog family / series | Connection or sourcing scope |
|---|---|---|
| Brennan[1] | 7001 | JIC-to-metric O-ring port connector family |
| Parker Triple-Lok[2] | F8OMX / F82EDMX / F87OMX | Distinct metric O-ring, metric ED and ISO 6149 connector families |
| Eaton / Aeroquip[1] | GG108-NP | JIC-to-metric O-ring connector reference family |
Use the Delphi product catalog above to select the required shape, then send your original brand number and drawing if available.
Catalog families are sourcing references, not a row-by-row interchange table for every Delphi item. Send the complete Parker, Brennan, Eaton or other-brand number and our engineers will confirm the requested configuration before an order.
Metric Hydraulic Connection Selection Guide
A metric thread callout such as M22 × 1.5 gives diameter and pitch, but it does not identify the sealing interface. The cone, stud-end and port standard must also be known. The table below separates three common families that can otherwise look deceptively similar.
| Connection family | Primary standard | How it seals | Information needed to order |
|---|---|---|---|
| 24° cone tube connection | ISO 8434-1 / DIN 2353 | Cutting-ring or O-ring-seal cone geometry at the 24° interface | Tube outside diameter, L or S series, end form and mating component |
| Metric O-ring port | ISO 6149 series | O-ring at the stud-end/port interface; the parallel metric thread provides retention | Thread size and pitch, adjustable or non-adjustable stud end, seal and port form |
| Metric port/line connection | ISO 9974 family | Depends on the defined stud-end type, such as an elastomeric or bonded sealing interface | Full ISO type or approved drawing—not “metric male” alone |
Functional Comparison with Brennan Metric Families
Delphi products are generally developed around Brennan-style specifications when a customer requests an equivalent. Brennan's current public catalog separates ORFS-to-metric adapters into distinct 60° line/port, bonded-seal, O-ring-retained and ISO 6149 O-ring stud-end families. This is why a generic metric thread description is not enough to establish interchangeability.
- ORFS-to-metric: compare Delphi 6068/6605 and 6069 starting points with the required ORFS size and the exact metric port or seat definition.
- JIC-to-metric: compare Delphi 9022, 9024, 9066, 9067 and 9069 by JIC tube size, metric thread and pitch, seat/stud-end form, orientation and envelope dimensions.
- NPTF-to-metric: Delphi 9235, 9325, 9607 and 9635S connect different sealing systems; inspect each end independently.
- Metric plugs and seals: verify the port standard and sealing geometry before pairing 9029, 9030M or 9500MM items with a component port.
Brennan is a trademark of its respective owner. References are for functional identification and buyer cross-checking only; Delphi Fittings is not claiming affiliation or universal interchangeability.
Minimum Information for a Metric Adapter RFQ
- Delphi number, complete competitor number, or customer drawing and revision.
- Metric thread diameter and pitch plus the port, cone, seat or stud-end standard.
- Tube outside diameter and L/S series when a 24° cone connection is involved.
- Second-end specification: JIC, ORFS, NPT/NPTF, BSPP or BSPT, including size and gender.
- Material, finish, seal material, operating medium, temperature and required working/test pressure.
- Annual volume, release quantity, packaging, labeling and inspection-document requirements.
Use calipers and a metric pitch gauge for initial identification, then verify the connection against the approved drawing or standard. Similar thread diameters do not prove that the seat, seal or pressure capability is compatible.
Primary Technical References
- ISO 8434-1:2018 — general and dimensional requirements for 24° cone connectors using cutting rings and O-ring-seal cones.
- ISO 6149-1:2022 — metric-thread ports used with adjustable and non-adjustable O-ring stud ends.
- Brennan ORFS Metric Conversion Adapters — current public reference for distinct metric connection and sealing families.
- Brennan / Volz DIN 2353 Metric Catalog — public reference for DIN 2353 and ISO 8434-1 product terminology.
Technical references reviewed September 6, 2026. The buyer's approved drawing and purchase-order requirements govern production.
Manufacturing and Inspection Scope
For recurring metric adapter programs, Delphi reviews connection callouts, drawing dimensions and inspection requirements before production. CNC machining, standard zinc plating, dimensional verification and final inspection are controlled in-house; forged blanks are sourced from qualified external partners where the body design requires forging.
- Thread inspection: diameter, pitch and thread tolerances are checked to the agreed drawing and inspection plan.
- Sealing geometry: cone angle, stud-end form, O-ring groove or bonded-seal face is verified separately from the thread.
- Mixed-standard adapters: both ends are inspected because JIC, ORFS, NPT/NPTF and BSP connections follow different sealing rules.
- Finish options: standard zinc plating is performed in-house; thicker zinc or zinc-nickel options can be quoted when longer salt-spray performance is required.
Common Metric Adapter Specification Questions
- Does M22 × 1.5 identify a complete hydraulic connection?
- No. It identifies the nominal metric thread diameter and pitch. The buyer must also identify the port or line standard, sealing interface, tube size where applicable, and mating component.
- Are DIN 2353 and ISO 8434-1 interchangeable descriptions?
- They are closely associated with 24° cone connector systems, but a production match still requires the series, tube outside diameter, thread, cone or seal form, material and drawing dimensions to be checked.
- Can Delphi quote a Brennan-style metric adapter?
- Yes, as a drawing-based equivalent project. Send the complete Brennan number and drawing or an approved sample. Delphi will verify both connection ends and the envelope dimensions rather than assuming a match from the series number.
Factory Supply for Metric Adapter Programs
Delphi Fittings supplies metric thread and DIN 2353 conversion adapters from Zhejiang, China for North American distributors, OEM buyers and private-label programs supporting imported and mixed-standard equipment. We help buyers specify the metric thread, tube size, sealing style and mating connection to JIC, ORFS, BSPP, BSPT or NPT.
Where a forged body is specified, approved external forging partners provide the carbon-steel blank. Delphi controls CNC machining, standard zinc plating, dimensional and thread verification, final inspection and export coordination. Send the part number, connection details, material, coating requirement and expected quantity for a factory-direct quotation.
Request a Drawing-Based Metric Adapter Quote
Send the complete connection descriptions, metric thread and pitch, sealing interface, drawing or cross-reference number, material, finish and required quantity. We will confirm the manufacturing scope and flag ambiguous port or seat details before quotation.
DELPHI FITTINGS