
Brass Compression Fittings Manufacturer in China
B-series tube fittings and components for OEM, distributor and private-label sourcing programs.
Factory Supply of Brass Compression Tube Fittings
Delphi Fittings manufactures B-series brass compression bodies, nuts, sleeves and tube inserts for North American distributors and OEM buyers. The catalog includes tube unions, NPTF connectors and tees that can be quoted against a Delphi number, a Brennan-style reference or a buyer-controlled drawing.
For a brass compression to NPT adapter, list the tube outside diameter (OD) on the compression side and the pipe thread size on the other. Specify male or female NPT and note whether the order is for the complete fitting or just the nut or sleeve.
These are tapered-sleeve compression components: tightening the nut drives a sleeve onto the tube outside diameter and against the fitting body. The approved assembly must define the tube material and size, sleeve design, body geometry, thread, application conditions and inspection requirements.
Review the available brass compression nuts, sleeves, unions, adapters and tees below, then send the required size combinations for dimensional confirmation.
Brass Compression Fitting Catalog
Adapters, Elbows & Tees
-
Part #: B-68
Compression Tube x NPTF Pipe Male Brass Fitting
Straight brass adapter connecting compression tube end to a female NPTF port.
-
Part #: B-62
Compression Tube Union Brass Fitting
Straight brass union connecting two pieces of tubing using compression ends.
-
Part #: B-66
Compression Tube x NPTF Pipe Female Brass Fitting
Straight brass adapter connecting compression tube end to a male NPTF pipe/fitting.
-
Part #: B-70
Compression Tube x Female NPTF 90° Elbow Brass Fitting
Brass 90° elbow connecting a compression tube end to a male NPTF pipe connection.
-
Part #: B-71
Compression Tube x NPTF Pipe Male Run Tee Brass Fitting
Brass run tee connecting two compression tube ends with one male NPTF pipe connection.
-
Part #: B-64
Compression Tube Union Tee Brass Fitting
Brass tee connecting three pieces of tubing using compression ends on all ports.
-
Part #: B-376
NPTF x NPTF x Compression Tee
Brass tee with female NPTF, male NPTF and compression tube connections.
Components & Accessories
-
Part #: B-60
Compression Tube Sleeve Brass Fitting
Replacement brass sleeve (ferrule) used in compression fittings to grip and seal the tube.
-
Part #: B-73
Insert for Plastic Tubing, Brass Fitting
Brass insert placed inside soft plastic tubing to provide internal support when used with compression fittings.
-
Part #: B-61
Compression Tube Nut Brass Fitting
Standard replacement brass nut used to tighten the compression sleeve/ferrule.
-
Part #: B-61L
Compression Tube Long Nut Brass Fitting
Longer brass nut providing more thread engagement or grip area for compression fittings.
PART-SERIES CROSS REFERENCE
Brass Tube Compression: Parker, Brennan & Eaton References
For Parker 60C / 61C / 62C / 68C or Eaton Weatherhead 60x / 61x / 62x / 68x sourcing, start with the sleeve, nut, union or connector family below. Include a complete Brennan or other supplier number and the tube OD. General-purpose compression and vehicle air-brake systems are separate product families.
| Reference brand | Catalog family / series | Connection or sourcing scope |
|---|---|---|
| Parker[1] | 60C / 61C / 62C / 68C | Sleeve, nut, union and male connector catalog families |
| Eaton / Weatherhead[2] | 60x / 61x / 62x / 68x | Compression sleeve, nut, union and male connector catalog families |
Use the Delphi product catalog above to select the required shape, then send your original brand number and drawing if available.
Catalog families are sourcing references, not a row-by-row interchange table for every Delphi item. Send the complete Parker, Brennan, Eaton or other-brand number and our engineers will confirm the requested configuration before an order.
Related Compression & Brass Lines: Tube Compression Fittings Overview · 316 Stainless DIN 2353 Fittings · Brass NPT Pipe Fittings.
Additional Brand Equivalents: Edelmann Brass · Weatherhead / Eaton.
Brass Compression Fitting Specification and Sourcing Guide
A complete compression connection combines the fitting body, sleeve, nut and specified tube. SAE J512 includes dimensional requirements for tapered-sleeve compression fittings intended for general use with annealed copper-alloy tubing. It also cautions against intermixing these components with spherical-sleeve parts covered by SAE J246.
| Selection point | What the buyer should specify | Why it matters |
|---|---|---|
| Compression system | Tapered sleeve, spherical sleeve, flanged sleeve, single ferrule or double ferrule | Parts from different systems may share tube sizes or thread appearances but use different sealing geometry. |
| Tube | Outside diameter, material, hardness, wall thickness and tolerance | The sleeve must grip and seal against the specified tube surface without damaging it. |
| Connection layout | Union, connector, elbow, tee, nut, sleeve or insert; include each end size and gender | Series numbers describe configuration, but size suffixes and end order still control the part. |
| Pipe thread | NPT or NPTF designation, nominal size, gender and required assembly method | The pipe-thread end seals differently from the tube-compression end. |
| Service conditions | Medium, pressure, temperature, vibration, regulatory restrictions and governing standard | No universal pressure, fluid-compatibility or potable-water claim applies to every brass alloy and assembly. |
Brennan-Style Series References
Delphi's B-series uses familiar configuration numbers found in Brennan's public brass catalog, including 60 for a sleeve, 61 for a nut, 62 for a tube union, 64 for a union tee, 66 for a female connector and 68 for a male connector. These references help buyers describe an existing requirement; they do not establish affiliation or automatic interchangeability.
Delphi compares the requested tube size, sleeve profile, thread, body geometry, material and critical dimensions with the buyer-approved drawing. Brennan also publishes separate single- and double-ferrule instrumentation families, so a Brennan brand name alone is not enough to identify the intended compression system.
Components That Must Be Reviewed Together
- Body: confirm the internal seat and the order, size and gender of every connection.
- Sleeve: match its profile and material to the fitting body and tube specification.
- Nut: verify its thread and length rather than substituting a visually similar nut.
- Tube insert: use only when required by the approved plastic-tube assembly.
- Assembly procedure: use the controlled supplier or OEM instruction; this page does not prescribe a universal wrench-turn value.
Information Needed for a Factory Quote
- Delphi, Brennan-style, OEM or distributor part number and a controlled drawing when available.
- Tube outside diameter, material, hardness and wall thickness.
- Compression-system type plus all pipe-thread sizes, genders and positions.
- Required brass grade, compliance restrictions and service conditions.
- Annual demand, order quantity, inspection records, marking and packaging requirements.
Technical references: SAE J512 Automotive Tube Fittings, SAE J246 Compression Tube Fittings, and Brennan Brass Fittings catalog. Reviewed September 6, 2026.
Brass Compression Fittings
For a factory-direct quote, send your part numbers or drawings and estimated quantities.
DELPHI FITTINGS